Digital transistors are not much different from ordinary transistors and do not use any digital technology. They only have one or two built-in bias resistors, known as bias resistor transistors.
Categories：Product knowledge Date：2025-01-14 Hits：591 View »
The problem with circuit design is to make MOS transistors operate in a linear state rather than in a switching state. This is also one of the reasons for the heating of MOS transistors.
Categories：Product knowledge Date：2025-01-14 Hits：455 View »
Organic field-effect transistors (OFETs) have received great attention from researchers due to their outstanding characteristics, including wide material sources, compatibility with flexible substrates, low-temperature processing, suitability for mass production, and low cost.
Categories：Product knowledge Date：2025-01-13 Hits：543 View »
When VGS>VTH, MOSFET behaves as a voltage controlled resistor; However, making MOSFETs the leader in integrated circuits today is definitely not just about voltage controlled resistors.
Categories：Product knowledge Date：2025-01-13 Hits：593 View »
Unidirectional thyristor is composed of semiconductor materials with three PN junctions.
Categories：Product knowledge Date：2025-01-13 Hits：571 View »
1. Overvoltage breakdown, 2. Overcurrent and overheating breakdown, 3. Overheating breakdown
Categories：Product knowledge Date：2025-01-10 Hits：579 View »
To make the thyristor conductive, the following conditions must be met
Categories：Product knowledge Date：2025-01-10 Hits：448 View »
Zener diodes are also a type of diode. When working normally, Zener diodes operate in the reverse breakdown region, where the current changes greatly while the voltage changes very little, thus achieving a voltage stabilization effect.
Categories：Product knowledge Date：2025-01-10 Hits：508 View »
Compared with parallel inverters, thyristor series inverters have more advantages:
Categories：Product knowledge Date：2025-01-09 Hits：455 View »
When a forward voltage is applied between the anode and cathode of a thyristor and no voltage is applied to the control electrode, the thyristor is in a forward blocking state.
Categories：Product knowledge Date：2025-01-09 Hits：514 View »
